MAXinBOX  FC 0-10V  FAN. Fan coil controller  for up to two 2/4-pipe units with 0-10 VDC fan speed control signal

MAXinBOX FC 0-10V FAN. Fan coil controller for up to two 2/4-pipe units with 0-10 VDC fan speed control signal

Product code: ZCLFC010F
Controller for up to two 2-pipe or 4-pipe fan-coil units with on/off valves and 0-10VDC fan speed control signal, ready to be mounted on DIN rails (4.5u). It has 4 multifunction outputs of 16A C-Load that can be used for the control of the fan-coil on/off valves or any other purpose. Moreover, it has 4 analog-digital multifunction inputs that can be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs. It also includes 2 thermostats and 10 logical functions, and allows the manual control of all the outputs with status indication through LEDs.
Price (Excluding GST)


  • 2 x 0-10VDC individual outputs for fan control.
  • 4 individual outputs (suitable for capacitive loads, maximum 40µF).
  • 4 analog/digital inputs.
  • Manual output operation in 0-10VDC and individual outputs with push button and status indicator LED.
  • Logical functions included.
  • Output timing facilities.
  • Total data saving on power failure.
  • Size 67 x 90 x 80 mm (40.5 DIN units).
  • DIN rail unit assembly (EN 50022), with snap fit clamp.
  • KNX BCU integrated.
  • Possibility to connect different phases in adjoining outputs.
  • CE directives compliant.

Technical Details


General System Specifications

  • KNX Power Supply: 29VDC
  • KNX Current Consumption: 11mA @ 29VDC
  • Operating temperature: 0 ¡C to 55 ¡C
  • Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
  • KNX bus  failure response: Data saving and output status change according to programming.
  • Response when restarting KNX bus: Data recovering and output status change according to programming when recovering.
  • Operation Indicator: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators show current output state.

Individual Output Specifications

  • Contact type: Potential free outputs through bistable relays with tungsten pre-contact.
  • Disconnection type: Micro-disconnection
  • Rated current by output: 16A (6)  250V AC (4000 VA), 16A (6) 30V DC (480W)
  • Maximum Power - Resistive load: 4000W
  • Maximum Power - Inductive load: 2000VA
  • Maximum inrush current: 800A/200_s, 165A/20ms
  • Outputs per common (channel): 1 individual output.
  • Different phase connection: Possibility to connect different phases in adjoining outputs
  • Connection type: Terminal block (screw)
  • Recommended cable section: 0.25 mm to 4 mm (26-10 AWG)
  • Cable type: Stranded or solid wire
  • Maximum response time: 50 ms
  • Expected life - Mechanical: 3 million operations (60cpm)
  • Expected life - Electrical: 100.000 cycles (6cpm/resistive load)

0-10V Output Specifications

  • Output voltage: From 0 to 10VDC
  • Output current: Maximum 10.5mA per output
  • Outputs per common: 1
  • Connection type: Terminal block (screw)
  • Recommended cable section: 0.15 mm to 20.5 mm 
  • Cable type Stranded or solid wire 

Input Specifications

  • Number of inputs per common: 4
  • Input voltage: +3.3V DC for the common
  • Input current: 1.0mA @ 3.3V DC (each input)
  • Input impedance: Approx. 3.3k
  • Switching type: Dry voltage contacts between input and common
  • Connection method: Cable screw terminal
  • Max. cable length: 30 m.
  • NTC probe length: 10.5 m. (max. 30m.)
  • NTC accuracy (@ 25 ¡C): 0.5 ¡C
  • Temperature measure precision: 0.1 ¡C
  • Cable cross-section: 0.15 mm to 20.5 mm (26-12 AWG)
  • Response time:  Max 10ms. 



Technology KNX
Mounting DIN Rail
Inputs 4
Input voltage KNX Bus (29VDC)
Outputs 6
IP rating IP20
Mounting Width 5MW
brand ZENNIO

Documents & Downloads

Look for similar items

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy