Crestron IP to KNX-IP Gateway
CRESTRON CI-KNX

Crestron IP to KNX-IP Gateway

Product code: CI-KNX
Provides a bi-directional Ethernet interface between Crestron and a KNX network.
Price (Excluding GST)
$P.O.A

Description

The CI-KNX is a bi-directional Ethernet interface to a KNX/EIB network. It is capable of addressing and controlling up to 250 KNX/EIB Objects. The unit is equipped whit a TCP/IP port that is capable of handling Power Over Ethernet. CI-KNX can be programmed in ETS (KNX/EIB programming software) and its competitive price point makes it ideal for smaller EIB/KNX installations although it is scalable for bigger projects if required.

Technical Details

Specification

CONNECTORS
BUS (KNX/EIB)(1) Wago connector, connects the CI-KNX with the KNX bus
LAN(1) 8-wire RJ45 connector; 10/100BaseT Ethernet port;
Power(2) Screw terminals; 12-24 Volt AC, 12-30 Volt DC
CONTROLS & INDICATORS
Programming ButtonUsed to set the CI-KNX is in ETS programming mode
Programming LED(1) Red LED; indicates the CI-KNX is in ETS programming mode
STATUSKNX status LED: (1) Green LED; Lights up to indicate bus voltage on KNX; Flashes to indicate telegram traffic
DIMENSIONS
Depth2.36 mm (70 in)
Height3.54 mm (90 in)
Width1.38 mm (35 in)
ENCLOSURE
Light gray polycarbonate housing, occupies 2 DIN module spaces
ENVIRONMENTAL
Humidity5% to 93% RH (non-condensing)
Temperature-5° to 45°C (23° to 113°F)
POWER REQUIREMENTS
Power Consumption0.8Watts (0.02 Amps @ 24 Volts DC) (power supply not included)

Properties

Properties

Brand CRESTRON
brand Other

Look for similar items

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy