PlanoSpot 360 KNX DE WH Passive infra-red presence detector
THEBEN 2039100

PlanoSpot 360 KNX DE WH Passive infra-red presence detector

Product code: 2039100
Presence detector (PIR) for ceiling installation. Flat design with interchangeable cover frame in different colours. Square 360° detection area, up to 8m x 8m, allows accurate and simple planning.
Price (Excluding GST)
$P.O.A

Description

  • Automatic presence- and brightness-dependent control for lighting and HVAC
  • Two differently sized detection zones for greater flexibility. Adjustable via parameters or remote control.
  • Manual alignment of the detection area (swivel mechanism)
  • Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs 
  • 3 directed light measurements
  • 2 light channels C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
  • Switched or constant light control with 2 independent control systems and standby function (orientation light)
  • Switching mode with dimmable lighting
  • Fully or semi-automatic
  • Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
  • Teach-in of the brightness switching value or the set point value
  • Light time delay configurable
  • Self-learning time delay can be set using parameters, object or via remote control
  • Reduction of time delay when present briefly (short-term presence)
  • Manual override by telegram or remote control
  • 2 presence channels C4, C5, individually configurable
  • Switch-on delay and time delay configurable
  • Room monitoring with selective movement detection
  • Setting the room correction factor for brightness measurement comparison
  • Configurable sensitivity 
  • Extremely simple setting of the energy-saving ratio with the new "eco plus" function
  • Test mode for checking function and detection area
  • Scenarios
  • Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
  • Installation in false ceilings with springs
  • Surface mounting on ceilings possible with the AP-frame (optional)
  • User remote control "theSenda S" (optional)
  • Management remote control "SendoPro" (optional)
  • Installation remote control "theSenda P" (optional)

Technical Details

Specification

  • Bus Voltage: KNX Bus 21...30VDC
  • Bus Current Consumption: 8mA
  • Recommended Installation Height: 2 - 3m
  • Setting Brightness Range: 10 - 3000 LUX
  • Detection Angle: 360°
  • Detection Range at 2.5m Mounting height: 16m2 (Sitting) 36m2 (Walking)


Properties

Properties

Brand THEBEN
Technology KNX
Frame finish White
Mounting Flush
Input voltage KNX Bus (29VDC)
Buscoupler Included
IP rating IP20

Look for similar items

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy