ACTinBOX MAX6. KNX multifunction actuator - 6 outputs

ACTinBOX MAX6. KNX multifunction actuator - 6 outputs

Product code: ZN1IOAB60
ACTinBOX MAX6 is a multifunction actuator that provides up to 3 configurable actuation channels. It includes advanced logical functions that provide it with numerous configuration possibilities. It is not suitable for capacitive loads.
Price (Excluding GST)


  • Reduced size: 90 x 60 x 35 mm (2 DIN rail units).
  • No external supply required different from bus.
  • KNX BCU integrated.
  • 3 actuation channels to be configured as:
    • shutter channels, up to 3
    • or individual outputs, up to 6.
  • Connectors wiring can be executed without the ACTinBOX. Once wired, the ACTinBOX can be installed.
  •  DIN rail unit assembly (EN 50022), with snap fit clamp.
  • Including Logical Functions.
  • Outputs timing facilities.
  • Total data saving on power failure.
  • Not valid for C-LOAD.
  • CE directives OK.

Technical Details


General System Specifications

  • KNX Power Supply: 29VDC
  • KNX Current Consumption: 7mA @ 29VDC
  • Operating temperature: 0 ¡C to 55 ¡C
  • Response to Bus Voltage Failure: Data saving and outputs changes as programmed.
  • Response to bus failure recovery: Data recovery and outputs changes as programmed.
  • Operation indication:  Programming LED lighting when pushing programming button.


  • Contact type: Potential-free make contact NOT VALID FOR C-LOAD
  • Disconnection type: Micro-disconnection
  • Rated current by output: 10A  250V AC (2500 VA), 10A 30V DC (300W)
  • Rated current by channel: 15A 250V AC (3750 VA), 15A 30V DC (450W)
  • Outputs per common (Channel) 12 outputs per common (/per channel)
  • Switching of different phases Phase 1 for channels A & B and phase 2 for channel C
  • Total max current in device: 20A
  • Connection type: Cable screw terminal
  • Recommended Cable Section: 0.25 mm to 20.5 mm 
  • Cable Type: Flexible cable using crimping terminals or rigid cable
  • Expected Life - Mechanical: 10 million operations (at 300cpm)
  • Expected Life - Electrical: 100.000 cycles at max current  (at 20cpm with resistive load)



Technology KNX
Mounting DIN Rail
Input voltage KNX Bus (29VDC)
Outputs 6
IP rating IP20
Mounting Width 2MW
brand ZENNIO

Documents & Downloads

Look for similar items

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy