MAXinBOX FANCOIL 4CH2P V2. Fan coil controller for 2-pipe unit - 4 channels
ZENNIO ZCL-4FC2PV2

MAXinBOX FANCOIL 4CH2P V2. Fan coil controller for 2-pipe unit - 4 channels

Product code: ZCL4FC2PV2
Fan coil controller for up to 4 units of 2-pipes fan coil. It includes a module with 20 logical functions and allows manual control of the outputs with status indication through LEDs.
Price (Excluding GST)
$P.O.A

Description

  • Up to four blocks to control 2-pipe fan coil units.
  • Manual output operation with push button and LED status indicator.
  • Logical functions included.
  • Output timing facilities.
  • Total data saving on power failure.
  • Size 90 x 60 x 140 mm (8 DIN units).
  • DIN rail unit assembly (EN 50022), with snap fit clamp.
  • No external power supply required other than the bus.
  • KNX BCU integrated.
  • Possibility to connect different phases in adjoining outputs.
  • CE directives compliant

Technical Details

Specification

General System Specifications

  • KNX Power Supply: 29VDC
  • KNX Current Consumption: 110.5mA @ 29VDC
  • Operating temperature: 0 ¡C to 55 ¡C
  • Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
  • KNX bus  failure response: Data saving and output status change according to programming.
  • Response when restarting KNX bus: Data recovering and output status change according to programming.
  • Operation Indicator: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.  

Output Specifications

  • Contact type: Potential free outputs through bistable relays.
  • Disconnection type: Micro-disconnection
  • Rated current by output: 8A (4A)  250V AC (2000 VA), 8A (4A) 30V DC (240W)
  • Outputs per common: 3 (fan outputs) or 1 (pipe outputs) 
  • Different phase connection: Possibility to connect different phases in adjoining outputs
  • Connection type: Terminal block (screw)
  • Recommended cable section: 0.25 mm to 4 mm (26-10 AWG)
  • Cable type: Stranded or solid wire
  • Maximum response time: 50 ms
  • Maximum Power - Resistive load: 2000W
  • Maximum Power - Inductive load: 1000VA
  • Expected life - Mechanical: 1 million operations (180cpm)
  • Expected life - Electrical: 50.000 cycles (6cpm/resistive load)
  • KNX Power Supply: 29VDC
  • KNX Current Consumption: 110.5mA @ 29VDC
  • Operating temperature: 0 ¡C to 55 ¡C
  • Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
  • KNX bus  failure response: Data saving and output status change according to programming.
  • Response when restarting KNX bus: Data recovering and output status change according to programming.
  • Operation Indicator: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.  

Output Specifications

  • Contact type: Potential free outputs through bistable relays.
  • Disconnection type: Micro-disconnection
  • Rated current by output: 8A (4A)  250V AC (2000 VA), 8A (4A) 30V DC (240W)
  • Outputs per common: 3 (fan outputs) or 1 (pipe outputs) 
  • Different phase connection: Possibility to connect different phases in adjoining outputs
  • Connection type: Terminal block (screw)
  • Recommended cable section: 0.25 mm to 4 mm (26-10 AWG)
  • Cable type: Stranded or solid wire
  • Maximum response time: 50 ms
  • Maximum Power - Resistive load: 2000W
  • Maximum Power - Inductive load: 1000VA
  • Expected life - Mechanical: 1 million operations (180cpm)
  • Expected life - Electrical: 50.000 cycles (6cpm/resistive load)



Properties

Properties

Brand ZENNIO
Technology KNX
Mounting DIN Rail
Input voltage KNX Bus (29VDC)
Outputs 4
IP rating IP20
Mounting Width 8MW
brand ZENNIO

Documents & Downloads

Look for similar items

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy